192.168.87.1 Router Login: Admin Access & Setup

The IP address 192.168.87.1 is a private address commonly used as the default gateway on certain routers, especially Technicolor models. It allows you to access the router's admin interface to configure Wi-Fi settings, change security options, or update firmware. You'll need this address when you want to customize your home network, update the Wi-Fi password, or fix connection problems. Our database lists 82 routers using this address, including models like the Technicolor TC7230, TG582n, and TG788vn. Keep in mind that not every router from these brands always uses this IP—check your device label or manual to confirm.

How to log in to 192.168.87.1

To log in, open a web browser and type http://192.168.87.1 into the address bar. Make sure you're connected to the router's network, either via Ethernet cable or Wi-Fi. A login page will appear, asking for a username and password. Enter your router's credentials (see the next section). If it's your first login, you may be prompted to change the default password. Once logged in, you'll access the dashboard where you can adjust settings. Always use a wired connection if possible to avoid disconnection during configuration.

Default username and password

Default credentials vary by model and Internet service provider. Check the sticker on the bottom of your router or the included documentation. For many Technicolor routers, common combinations include admin/admin, admin/password, or a unique password printed on the device. Our database includes 82 models compatible with 192.168.87.1: verify your specific model for exact login details. If you've changed the password and forgotten it, a factory reset may be necessary (usually by holding the reset button for 10–30 seconds).

Troubleshooting

If the 192.168.87.1 page won't open, first ensure you're connected to the correct network—disable any VPN or mobile data. Confirm you're using http:// and not https://. Try clearing your browser cache or switching to a different browser. Restart your router and computer. Check your device's IP address: on Windows, open Command Prompt and type ipconfig; on Mac/Linux, use ifconfig. The default gateway should be 192.168.87.1. If it's different, look up the correct gateway address. Also, temporarily disable firewall or security software that might block access.

192.168.87.1 vs common typing mistakes

It's easy to mistype 192.168.87.1 as similar addresses like 192.168.0.1 or 192.168.1.1. Double-check each number: the address contains only digits separated by dots, no letters. For example, 192.168.87.l (with a lowercase L) is incorrect. Avoid adding extra spaces or characters. If unsure, copy and paste the exact address from your router's documentation. Remember that IP addresses never include letters—only numbers and periods.

Security tips

After logging in, immediately change the default admin password to prevent unauthorized access. Update your router's firmware if a new version is available to patch security vulnerabilities. Set a strong Wi-Fi password using WPA2 or WPA3 encryption. Disable remote administration if you don't need it. Consider changing the default SSID (network name) to something unique that doesn't reveal the router model. Restart the router after making changes to apply the new security settings.

FAQ

What should I do if I forgot my router's admin password?

If you've forgotten the password, you can reset the router to factory defaults by pressing and holding the reset button for 10–30 seconds. Be aware that this will erase all custom settings, including your Wi-Fi name and password.

Can I change the IP address 192.168.87.1 to something else?

Yes, in the admin interface, you can change the router's LAN IP address under network settings. Make a note of the new address, as you'll need it for future logins. Choose an address within the private range, like 192.168.x.x.

Why do I see a 'Connection not secure' warning in my browser?

This warning appears if you try to access the router with https:// instead of http://. The local admin page typically uses an unencrypted connection, which is safe because the communication stays within your local network. You can proceed safely using http.

How can I find my router's IP address if it's not 192.168.87.1?

On Windows, open Command Prompt and type ipconfig—the Default Gateway is your router's IP. On Mac, go to System Preferences > Network, select your connection, click Advanced, and look under TCP/IP for the Router address. On mobile devices, check the Wi-Fi details in settings.