Router Login via 192.168.38.1: Setup & Configuration

The IP address 192.168.38.1 is a private address used by certain routers, notably from Jensen Scandinavia, to access the administration interface. It serves as the default gateway for configuring network settings, Wi-Fi, security, and other advanced features. You'll need it when you want to change the wireless network name, password, or update the firmware. Typically, this address is entered into a web browser's URL bar, provided your device is connected to the router's local network. Our database lists 15 router models compatible with this IP, primarily from Jensen Scandinavia.

How to log in to 192.168.38.1

To log in, make sure you're connected to the router's network, either via Ethernet cable or Wi-Fi. Open a modern browser, type http://192.168.38.1 into the address bar, and press Enter. A login page should appear. Enter the administrator username and password. If you don't know them, check the label on the router or the manual. Avoid using a VPN or mobile data, as this will block access. If the page doesn't load, verify that your computer's IP address is in the same network range (e.g., 192.168.38.x).

Default username and password

Default credentials vary by model and provider. There is no universal combination. Common ones include 'admin / admin' or 'admin / 1234', but this is not guaranteed. The sticker on the router usually shows the exact values. If they've been changed and forgotten, a factory reset may be necessary (using the reset button). Check our list of compatible routers for more specific information about your model.

Troubleshooting

If you can't access 192.168.38.1, first ensure you're connected to the router's network and not another Wi-Fi or mobile data. Disable any VPN. Make sure you're using http:// and not https://, as most local interfaces lack SSL certificates. Clear your browser cache or try a different browser. Restart the router and your computer. Finally, check your connection's default gateway: on Windows, type ipconfig in Command Prompt; on Mac/Linux, use ifconfig or ip route. The gateway should be 192.168.38.1 for access to work.

192.168.38.1 vs common typing mistakes

The address 192.168.38.1 is often confused with incorrect variants like 192.168.38.0.1, 192.168.38.l (letter L instead of number 1), or 192.168.38.1.1. These typos prevent access. An IP address consists only of numbers and dots. Be careful not to insert spaces or letters. If you use the correct address but the page still doesn't appear, the issue likely lies with your network configuration or the router itself.

Security tips

After logging in, immediately change the default administrator password to prevent unauthorized access. Use a strong password combining letters, numbers, and symbols. Update the router's firmware if a new version is available, as this fixes security vulnerabilities. For Wi-Fi, enable WPA3 encryption or at least WPA2 with a robust password. Disable remote administration if it's not needed.

FAQ

Why can't I access 192.168.38.1?

Check that you're connected to the router's network, you're using http://, and your device's IP is in the same range. Disable VPN and mobile data, then restart the router and your device.

What are the default credentials for 192.168.38.1?

They vary by model. Look at the label under the router or check the manual. Common combinations include admin/admin or admin/1234, but there's no guarantee.

How do I reset my router if I forgot the password?

Press the reset button on the back of the router for 10 to 30 seconds using a paperclip. The router will restart with factory settings, including default credentials.

Can I change my router's IP address from 192.168.38.1?

Yes, in the admin interface, you can change the router's LAN IP address, for example to 192.168.1.1. Note the new address, as you'll need it for future logins.