Router access guide

Sitecom WL-017

How to connect to a WL-017 router?

Daily Updates

IP Address

192.168.0.1

admin

Password

admin

Access Now Compare

Make sure your device is connected to the same network as the router (via Wi-Fi or Ethernet cable).

Connect your device to the router via Ethernet or Wi-Fi.

Open a web browser and enter the default IP address for the router usually 192.168.0.1 .

Enter the default username and password, usually admin and admin.

Use the same network

Connect your phone or computer to this router’s Wi‑Fi before opening the admin address.

Use the address bar

Type the IP in the browser URL bar, not in Google or another search field.

Check the label

If credentials fail, check the router label, manual, or details from your internet provider.

Product notes

Description

The Sitecom WL-017 router is a wireless broadband router that allows you to connect multiple devices to the internet wirelessly. It uses the 802.11b/g/n wireless standard and has a maximum wireless speed of 150 Mbps. It also has four Ethernet ports for wired connections and supports WEP, WPA, and WPA2 security protocols to protect your network. It comes with a setup wizard to guide you through the installation process and is compatible with most internet service providers.

The WL-017 is a router manufactured by the company Sitecom that allows multiple devices to connect to a network and communicate with each other. It works by receiving data packets from devices and forwarding them to their intended destination. The router is assigned a unique IP address 192.168.0.1, which serves as its identifier on the network.

To access the router's settings and configure its functions, users can log in using a web browser and their admin and admin. Once logged in, users can customize various settings such as network name, password, and security protocols. They can also set up parental controls, prioritize bandwidth usage, and monitor network activity.

If the page does not open

Turn off VPN or mobile data, confirm the right Wi‑Fi network, try http instead of https, then restart the router if needed.

After logging in

Change the default admin password, use strong Wi‑Fi encryption, and check for firmware updates.

About default credentials

Default credentials can vary by firmware, provider, or previous setup. Use them as a starting point, then secure access.

Access Now · 192.168.0.1