How to connect to a GT724WGR router? Actiontec
Connect your device to the router via Ethernet or Wi-Fi.
Make sure your device is connected to the same network as the router (via Wi-Fi or Ethernet cable).
Open a web browser and enter the default IP address for the router usually 192.168.0.1 .
http://192.168.0.1Open Router Panel Enter the default username and password, usually test1 and test2.
LoginadminPasswordadmin
Summary
Brand Actiontec
Router GT724WGR
IP Address
192.168.0.1Login
adminPassword
adminDescription
The Actiontec GT724WGR is an ADSL2+ wireless gateway combining a built-in ADSL modem, four-port Ethernet switch, and 802.11g wireless access point. Designed for home and small-office use, it delivers basic broadband routing, firewall, NAT, and DHCP services. USB port for storage/printer sharing, QoS for prioritizing traffic, and web-based configuration simplify setup. Compatible with common ISP settings, it supports WPA/WPA2 security and IPv4 routing. Compact and budget-friendly, it suits modest residential networking needs and basic management.
The GT724WGR is a router manufactured by the company Actiontec that allows multiple devices to connect to a network and communicate with each other. It works by receiving data packets from devices and forwarding them to their intended destination. The router is assigned a unique IP address 192.168.0.1, which serves as its identifier on the network.
To access the router's settings and configure its functions, users can log in using a web browser and their admin and admin. Once logged in, users can customize various settings such as network name, password, and security protocols. They can also set up parental controls, prioritize bandwidth usage, and monitor network activity.