10.0.0.1 Login – Router Admin & Default Password
The IP address 10.0.0.1 is a private address commonly used as a default gateway to access the admin interface of many routers and modems. It belongs to the class A private address range (10.0.0.0 to 10.255.255.255), reserved for local networks. You'll need it to configure your Wi-Fi network, change the admin password, update firmware, or troubleshoot connection problems. To log in, simply open a browser and enter http://10.0.0.1 in the address bar, then enter your credentials.
Same network
Connect your phone or computer to the router Wi‑Fi before opening the address.
Browser
Type the address in the URL bar, not the search box.
Credentials
Check the router label, manual, or your internet provider.
IP facts
Technical facts derived directly from the IPv4 address and our router database.
- Address
- 10.0.0.1
- Network scope
- Private IPv4 address
- Expected access
- From the local network only
- Referenced router models
- 1555
Address classification source: IANA IPv4 Special-Purpose Address Registry
Router login
To log into the admin interface via 10.0.0.1, first make sure your device is connected to the router's network, either via Ethernet cable or Wi-Fi. Open your preferred browser and type exactly http://10.0.0.1 in the address bar, then press Enter. A login page should appear. Enter the admin username and password. If you don't know them, check the label on the router or the list below. Once logged in, you can modify settings.
Username and password
Default credentials vary by manufacturer and router model. Common combinations include admin/admin, admin/password, or a blank username and 'admin' for the password. Check the label on your device or consult our list of compatible routers to find the specifics for your model. If the default credentials have been changed and you've forgotten them, a factory reset may be necessary.
Troubleshooting
If you can't access the login page, verify that your device is connected to the router's network and that you're not using a VPN or mobile data. Make sure you're typing http://10.0.0.1 and not https://. Try clearing your browser cache or using a different browser. Restart your router and your device. If the address doesn't work, check your connection's default gateway: on Windows, use ipconfig; on Mac, go to System Preferences > Network.
Common address mistake
The IP address 10.0.0.1 uses only numbers. Common mistakes include typing letters like '10.0.0.l' or adding spaces. Other similar addresses like 10.0.10.1 or 10.0.0.0.1 are incorrect. Make sure you've entered each digit correctly. If your router uses a different address, such as 192.168.0.1, you'll need to use that one to log in.
Security after login
After logging in, immediately change the default admin password to a strong, unique one. Enable WPA2 or WPA3 encryption for your Wi-Fi network and set a robust Wi-Fi password. Regularly update your router's firmware to patch security vulnerabilities. Disable remote administration and WPS if you don't use them, to reduce the risk of unauthorized access.
FAQ
What should I do if I forgot my admin password?
If you forgot the password, you can reset the router to factory settings by holding the reset button for about 10 to 30 seconds. Note that this will erase all your custom configurations.
Why won't the address 10.0.0.1 open?
This could be due to an incorrect connection, using a VPN, or your router using a different IP address. Check your device's default gateway to find the correct address.
Is 10.0.0.1 the same as 10.0.0.0.1?
No, 10.0.0.0.1 is not a valid IP address. IP addresses consist of four groups of digits separated by dots. Make sure to use exactly 10.0.0.1.
Can I change my router's IP address?
Yes, in the admin settings, you can usually change the router's local IP address. After the change, you'll need to use the new address to log in.
Hoe u het IP-adres gebruikt
Open een webbrowser (zoals Chrome of Firefox).
Typ in de adresbalk het IP-adres dat u wilt bereiken (bijv. 192.168.1.1) en druk op Enter.
U wordt doorgestuurd naar de instellingeninterface van de router. Voer de gebruikersnaam en het wachtwoord in (vaak admin / admin of afgedrukt op het apparaat).