10.1.1.3 Login – Router Admin & Default Password
The IP address 10.1.1.3 is a private address used by default on certain router and access point models, particularly from D-Link. It allows you to access the device's administration interface to configure your Wi‑Fi network, change security settings, or update the firmware. You will need this address if your router uses this IP as its default gateway and you want to customize your network. Note that not all routers use this address; it is specific to select models. If your device is compatible, typing 10.1.1.3 into your browser's address bar will take you to the login page.
Same network
Connect your phone or computer to the router Wi‑Fi before opening the address.
Browser
Type the address in the URL bar, not the search box.
Credentials
Check the router label, manual, or your internet provider.
IP facts
Technical facts derived directly from the IPv4 address and our router database.
- Address
- 10.1.1.3
- Network scope
- Private IPv4 address
- Expected access
- From the local network only
- Referenced router models
- 343
Address classification source: IANA IPv4 Special-Purpose Address Registry
Router login
To log in, first make sure your device (computer or mobile) is connected to the router's network, either via Ethernet cable or Wi‑Fi. Open a web browser and type http://10.1.1.3 into the address bar, then press Enter. Avoid adding 'www' or '.com'. If the address is correct, your router's login page should appear. Enter the username and password. If you don't know them, check the label on the router or the manual. After logging in, you can modify settings. If it fails, verify that this IP is indeed your gateway.
Username and password
Default credentials vary by router model and Internet service provider. Many D-Link devices compatible with the 10.1.1.3 IP often use 'admin' as the username and 'admin' or a blank field as the password. However, these are not universal. Check the list of compatible routers on our site to find the credentials for your specific model. Also look at the label on your router, which usually shows the factory settings. If these have been changed, you may need to reset the device.
Troubleshooting
If you cannot access 10.1.1.3, first check that you are connected to the router's network, not a mobile network or a VPN that might block local access. Make sure you type the address correctly, without letters (for example, do not confuse the number 1 with the letter l). Try using http:// rather than https://, as most interfaces lack an SSL certificate. Clear your browser cache or try another browser. Restart your router and your device. Finally, verify that 10.1.1.3 is your default gateway by opening a command prompt and typing 'ipconfig' (Windows) or 'ifconfig' (Mac/Linux).
Common address mistake
It is crucial to enter the IP address 10.1.1.3 correctly. Common mistakes include using letters instead of numbers, such as '10.1.l.3' (with a lowercase L), or adding extra characters like '10.1.1.3.com'. Another frequent confusion is with similar addresses like 10.1.1.1 or 10.1.1.2. Remember that IP addresses consist only of numbers and dots. If typed incorrectly, the browser will show an error or a search page instead of the admin interface.
Security after login
After logging into the interface via 10.1.1.3, it is recommended to immediately change the default administrator password to prevent unauthorized access. Choose a strong, unique password. Also check if a firmware update is available and apply it to fix potential security vulnerabilities. Finally, configure your Wi‑Fi network with WPA2 or WPA3 encryption and a robust password. These simple measures protect your network from intrusions.
FAQ
Why can't I access 10.1.1.3?
This can be due to an incorrect network connection, a typo, a blocking firewall, or because your router does not use this address. Check your default gateway using the ipconfig command (Windows) or ifconfig (Mac/Linux).
What if I forgot my administrator password?
If you changed the password and forgot it, you will need to reset the router to factory settings. Look for a 'Reset' button on the back of the device, and hold it down for 10 to 30 seconds. Note that this will erase all your configurations.
Does 10.1.1.3 work for all routers?
No, this address is mainly used by certain D-Link models and some other brands. Check the list of compatible routers on our site to see if yours is included.
Can I change my router's IP address from 10.1.1.3 to something else?
Yes, in the admin interface you can usually change the router's LAN IP address. Make sure to choose an address in a private range (for example 192.168.x.x) and note it down for future logins.
How to Use the IP Address
Open a web browser (like Chrome or Firefox).
In the address bar, type the IP address you want to access (e.g. 192.168.1.1) and press Enter.
You’ll be taken to the router’s settings interface. Enter the username and password (often admin / admin or printed on the device).