10.1.1.2 Login – Router Admin & Default Password
The IP address 10.1.1.2 is a private address commonly used as a default gateway to access the admin interface of certain routers, especially D-Link models. It lets you change network settings, Wi-Fi configuration, firewall rules, and more. To reach the login page, type this address into your browser's URL bar while connected to the router's local network. Because it is a private address, it is not accessible from the internet, which adds a layer of security. Once you enter the correct credentials, you can manage your router's control panel. This guide walks you through the process, whether you're a home user or a professional.
Same network
Connect your phone or computer to the router Wi‑Fi before opening the address.
Browser
Type the address in the URL bar, not the search box.
Credentials
Check the router label, manual, or your internet provider.
IP facts
Technical facts derived directly from the IPv4 address and our router database.
- Address
- 10.1.1.2
- Network scope
- Private IPv4 address
- Expected access
- From the local network only
- Referenced router models
- 343
Address classification source: IANA IPv4 Special-Purpose Address Registry
Router login
To log in to the admin interface using 10.1.1.2, first make sure your device is connected to the router's network via Ethernet or Wi-Fi. Open a web browser and type http://10.1.1.2 in the address bar, then press Enter. A login page should appear asking for a username and password. If you don't know them, check the sticker on the router or the manual. Enter the credentials and click Login. Once logged in, you'll see the dashboard where you can configure your network.
Username and password
Default credentials vary by router model and ISP. There is no single username and password for 10.1.1.2. Common combinations include admin/admin, admin/password, or admin/1234. However, we recommend checking the label on your router, the user manual, or our list of compatible routers. If the credentials were changed and you've forgotten them, a factory reset may be needed, but this will erase all your custom settings.
Troubleshooting
If you can't reach the login page using 10.1.1.2, first check that you're connected to the router's network. Make sure you're not on a VPN or mobile data. Try using http://10.1.1.2 instead of https://. Clear your browser cache or try a different browser. Restart your router and your device. If the issue persists, verify the default gateway: on Windows, open Command Prompt and type ipconfig; on Mac, go to System Preferences > Network. The gateway address shown should match your router's IP.
Common address mistake
It's common to confuse 10.1.1.2 with incorrect variations. For example, some users type 10.1.1.2.1 or 10.1.1.2.0 by adding an extra digit. Others use letters like 10.I.I.2 or 10.1.l.2. An IP address must contain only numbers and dots. Make sure you haven't included spaces or special characters. Double-check that you entered 10.1.1.2, not 10.1.1.1 or 192.168.1.1, which are different common addresses.
Security after login
After logging into the admin interface, it's crucial to secure your router. Start by changing the default admin password to a strong, unique one. Update the router's firmware to the latest version to patch security flaws. Configure your Wi-Fi with WPA3 or WPA2 encryption and a robust password. Disable remote administration if you don't need it. Also, consider regularly changing passwords and monitoring connected devices on your network.
FAQ
What should I do if I forgot my router's password?
If you forgot the admin password, you can reset the router to factory settings by holding the reset button for about 10 seconds. Note that this will erase all your custom configurations.
Why isn't 10.1.1.2 working?
Make sure your device is connected to the router and that the default gateway is indeed 10.1.1.2. Also check that you're using http://, not https://, and that there are no typos.
Can I change my router's IP address?
Yes, most routers allow you to change the gateway IP in the network settings. Log in to the admin interface, look for LAN or local network settings, and set a new IP address within the private range.
How do I find my router's default username and password?
Default credentials are usually on a sticker under the router or in the user manual. You can also check our list of routers compatible with 10.1.1.2 for model-specific information.
How to Use the IP Address
Open a web browser (like Chrome or Firefox).
In the address bar, type the IP address you want to access (e.g. 192.168.1.1) and press Enter.
You’ll be taken to the router’s settings interface. Enter the username and password (often admin / admin or printed on the device).